Pacejet

PACEJET CENTER: 2 of 3. Configuring the Pacejet Center

Overview

THIS ARTICLE IS ONLY FOR USERS OF PACEJET FOR NETSUITE SHIPPING
USING VERSION 2.0 SCRIPTS (or higher) - DO NOT ATTEMPT ANY OF THE STEPS IN THIS ARTICLE WITHOUT CONTACTING PACEJET SUPPORT
Most Pacejet customers are currently using Pacejet's SuiteScripts 1.0 scripts, and the information provided below does not apply to that environment.
If you are unsure, please contact your Pacejet Representative.


You can link to the different articles using the navigation bar on the left.

This page is intended for NetSuite Administrators. Each NetSuite Administrator must configure the Pacejet Center for their own NetSuite account.


Prerequisites

Before you complete the procedures in this article, you must configure Pacejet Settings (see Pacejet Center: 1 of 3. Configuring Settings and Connecting to Pacejet ). Moreover, your Implementation Specialist must run the NetSuite Implementation Script in Pacejet.


In this article

This article includes procedures for configuring the Pacejet Center in NetSuite. This entails setting up three portlets in the Pacejet Center:

  • The Getting Started with Pacejet portlet (below) - This is where Administrators initiate actions such as Updating Pacejet Classes of Service and Resetting Pacejet XRef of Shipping Items.

  • The Pacejet Xref Setup portlet (below) - This is where Administrators map Pacejet Carrier Classes of Service to NetSuite Shipping Items.

  • The Pacejet Execution Logging portlet (below) - In this portlet, Administrators and Pacejet Support can review Pacejet Execution logs by Date, Type, and/or Script.

Opening the Pacejet Center

  1. On the NetSuite main menu, click Pacejet.

    pacejet.png
    This opens the Pacejet center with three 'blank' portlets.

    custom_panel.png

If you don't see Pacejet on the main menu, it may be under the More Options menu at the far right (see below). If you still don't see the Pacejet menu there, refer to the article Adding Pacejet to the NetSuite Menu.


mceclip1.png


Setting up the Getting Started with Pacejet portlet

  1. In the Custom Content portlet on the left, click set up.
    Setup.png

  2. In the Custom Content dialog, in the SOURCE field, select Pacejet COS Portlet.
    COS_pane.png

  3. Click Save. This sets up the Getting Started with Pacejet portlet.
    getting_started_portlet.png


Setting up the Pacejet Xref Setup portlet

  1. In the top right portlet, click set up.

  2. In the Custom Search dialog, in the SEARCH field, select Pacejet Xref Setup.
    Setup_Pacejet_Xref_Panel.png

  3. Set the RESULTS SIZE to at least 70.

  4. Click Save. This sets up the Pacejet Xref Setup portlet.
    xref_setup_blank.png

To create Xref records to map Pacejet Carrier Classes of Service to NetSuite Shipping Items, continue to Pacejet Center: 3 of 3. Mapping Pacejet Carrier Classes of Service to NetSuite Shipping Items after you complete all the procedures in this article.


Setting up the Pacejet Execution Logging portlet

  1. In the lower right portlet, click set up.

  2. In the Custom Search dialog, in the SEARCH field, select Pacejet Execution Logging.
    Setup_Pacejet_Execution_Loggin_panel.png

  3. Set the RESULTS SIZE to at least 50.

  4. Click Save. This sets up the Pacejet Xref Setup portlet.
    execution_logging_blank.png


NEXT: Pacejet Center 3 of 3: Mapping Pacejet Carrier Classes of Service to NetSuite Shipping Items